Incorporating Toshiba’s innovative imaging solutions, Toshiba e-Studio 203L 4-in-1 multifunction device is ideally suited for small workplaces that require dependability and low total cost of ownership apart from quick document processing.

Finally you can close the front cover and test your Toshiba e-Studio 203L Laser Printer. Once the transfer charger wire is clean, you can return the charger cleaner, the automatic duplexer, and the bypass tray to their original positions. The cleaner must be inserted into the edge of the transfer separation unit, in order to wipe the transfer charger wire properly. Now, you must open the transfer cover and take out the transfer charger cleaner from the front pocket (on the front left side). In the next step, you must lower the bypass tray and open the automatic duplexer. Once prepared, the new cartridge could be inserted into the printer. You must shake the new toner cartridge horizontally for 7-8 times, in order to loosen the toner inside, and then you can pull out the protective seal in the direction illustrated by the arrow (printed on the seal). Now, you can pull out the old toner cartridge towards you and unpack the new one. In order to change the exhausted toner cartridge, you must open the front cover of your e-Studio 203L and press the green lever (next to the toner cartridge) down.

Toshiba e studio 203l driver